Non-Compatibility of Processor and Motherboard

Processor and Motherboard compatibility is the most important thing to know before you go about assembling a computer. The reason being if you buy a processor that does not support your motherboard or vice-versa, you'll end up losing a huge amount of money because the processor and the motherboard combo are the most expensive components apart from the graphic card.
In case your processor and motherboard are not compatible with each other, either of the following scenarios may take place.

• First, your new processor might not fit into the socket of the motherboard. This option is the better of the two, because it will not damage any component of your system. The only solution is to buy either a new processor or a new motherboard.
• Second, and you better hope this does not happen. The second case, which rarely happens is the time when your incompatible processor gets seated firmly in the motherboard but, does not get recognized by the motherboard and/or perform normally. This may damage either/or both of the components.

So it is extremely necessary that you know if the processor and the motherboard are compatible with each other or not before you go shopping.

Specifications of a CPU: part 2

Rest of the specifications of a CPU to be considered are:

• Instruction Set Size: Size of the instructions the processor can address simultaneously. It also defines the maximum amount of memory that the CPU can address. Currently, 32-bit and 64-bit.
• Memory Type: The standard and speed of RAM that the CPU is designed to address efficiently. If the RAM used in the system is other than the one specified by the CPU manufacturer, it may cause the system to lag.
• Max Memory Size: The maximum amount of physical memory that the CPU can support. If more RAM is installed than this, it may result in an unstable system.
• Number of Memory Channels: It specifies the number of RAM slots the CPU can work with efficiently. If the CPU is installed on a motherboard with more slots than this, it will cause the system to lag.
• PCI-E Support: Number of PCI Express slots supported and the PCI-E standard supported.
• Integrated Graphics: If the CPU has integrated graphics unit, then the graphics frequency is also to be considered.
• Socket Size: If you need to replace your processor, you need to be sure that the processor's socket size matches with the socket size of your existing motherboard.

Just keep in mind all of the above mentioned specifications while choosing a processor and you will have a super performance system.

Motherboard: ports and sockets

This image shows only those interfaces (ports and sockets) that are important to our interest and point of view.

The rest of the small semiconductor parts of the motherboard are not of our interest, but for their designer.

In this post, only the names of all the interfaces have been mentioned.

Other than these interfaces, there are numerous chips and IC's for various functions as well.

They along with the functions of these interfaces would be described sometime later.

The components are so named:

A,B : PCI connector

C : CMOS battery

D : PCI-E (x1) connector

E : PCI-E (x16) connector

F : S/PDIF connector

G : Back-panel for I/O devices

H : 12V processor power (4-pin)

I : Rear chassis fan header (3-pin)

J : Processor socket

K : Processor fan header (4-pin)

L,M : RAM (channel A,B) sockets

N : Chassis intrusion header

O : Serial port header

P : Floppy Drive connector

Q : Main power connector (24-pin)

R : Parallel ATA (IDE) connector

S : Serial ATA (SATA) connectors

T : Front panel header

U : Alternate front panel power LED header

V : BIOS configuration jumper

W : Front USB headers

X : Speaker

Y : Front chassis fan header (3-pin)

Z : Front panel audio header